THis is a silent board/screen combo for upgrading a ender 3/pro to a "Ender 1.5" - adding this kit gets a direct replacement silent board, and a color V2 screen, allowing you to run Miriscoc Professional Firmware
Click HERE to purchaseCr-Touch kit, includes cable, CR-touch probe, and 3 mounts that fit most printers. If the mount does not fit yours (sermoon, some others) most mounts can be 3d printed.
Click HERE to purchaseComplete replacement kit for Ender 3/Ender 3 pro, contains fans, hot end, shroud, thermistor, heating element, nozzle, and sock
Click HERE to purchaseThis is the typical glass plate for Ender 3, pro, V2, or any machine with a 230x230 (actual size) glass bed
Click HERE to purchasereplaces both the heater element and thermistor for most Creality machines with a MK8 Hot end
Click HERE to purchaseReplaces most Creality MK8 hot end heater elements.
Click HERE to purchaseThis is a metal extruder kit, upgraded bed springs, and capricorn tubing in one package, a great deal for those who need it - fits most creality printers
Click HERE to purchaseStand alone purchase of just the silent board to silence Ender 3/Ender 3 Pro (V2 machines already have this)
Click HERE to purchaseincludes a entire set up. extra socks, nozzles, new heater element, new thermistor, new hot end assembly, fans, and shroud cover
Click HERE to purchaseFits most Creality machines with a MK-8 style hot end (ender 3 variants without the Sprite Extruder, and many others that have the standard Creality Hot End)
Click HERE to purchaseGreat for experimenting with different size outputs. comes with .2, .3, .4, .8 and .10
Click HERE to purchaseFits most creality machines using a MK8 hot end. There are cheaper ones, but they are CHEAP and tend to bend during tightening the bottom bolts. these are decent, still cheap, but workable.
Click HERE to purchaseGenerally this is the power supply used in most 3d Printers. - ALWAYS COMPARE FIRST. this will work in Ender series and has a 350 watt max draw. Most 3d printers use less - your label on your existing power supply will give you its max rating. This is a solid supply and my go to if I need to replace one.
Click HERE to purchaseI have bought so many of these. replacements when your pom wheels get grooves in the sides, flat spots or other issues.
Click HERE to purchaseA great addition to your printer, easier to grab, nice large size, and dresses up the machine a bit, one side is raised slightly in the center, that side goes toward the bed, or they will rub. They should fit most printers (looking at you, anycubic with your teeny tiny wheels) but not confirmed.
Click HERE to purchaseWill definately work for ender 3/pro, should work for Ender 3 V2 - havent verified that - I usually just buy the hot end kit for the extra shrouds and other parts for my stock.
Click HERE to purchaseReplacement belts for Ender 3 and Ender 3 pro - **NOT for Ender 3 V2** Perfect fit, correct belts.
Click HERE to purchaseThe specific belts for a Ender 3 V2 machine, **NOT for Ender 3 original or Ender 3 Pro)
Click HERE to purchaseThis is both tensioners for the Ender 3 Pro, also will work with Ender 3 V2 but you may need to get the shorter belts. The Y tensioner is for 2040 Extrusions so if you have a Ender 3 original, you need the one for the 2020 extrusion.
Click HERE to purchaseThese are for the Ender 3 original with the 2020 extrusion. Make sure you choose the box that says 2020 when selecting.
Click HERE to purchase5 feet of belt material, simply cut it long enough to fit, make sure you leave enough extra to fold over. Fold over so the teeth mesh, put on a zip tie. Brass attachements not needed.
Click HERE to purchase